Aquarium / DI  RO system

The system comes pre loaded will all filters needed so that all of these extra's truly are extra's! Enough Filters included to Produce 7000+ Gallons of ultra pure, Alkaline drinking water lasting the average household 3-5 years.

Offering 6 stages of Reverse Osmosis water filtration producing measurably pure Alkaline drinking water with a healthy PH between 7.6 - 8.5. Purity is accomplished by utilizing a combination of three high efficiency SED & Carbon pre-filters followed by its Reverse Osmosis Membrane through its 6oz DI Resin Stage where any remaining extremely small particulates are further captured and the PH raised. Finally, the now ultra pure water passes through the polishing filter before dispensing at the dedicated Aquasafe faucet. This advanced water filtration method removes 98-100% of your tap waters contaminants including Lead, Chlorine, Fluoride, Bacteria, Viruses, Pesticides, Pharmaceuticals, Heavy Metals, Industrial Pollutants, Radioactive Particles and a vast list of other harmful contaminants now commonly found in tap water. With the TDS Meter that is included with this system you can scientifically test the PPM (Parts Per Million) of the water produced to ensure purity! This test takes just seconds and is a simple push of a button. 

STAGE 1:  (SED; 5 Micron Sedimentary Filter)
Sediment Removal / PP– Commercial grade sediment filter. Sediment filtration extracts suspended sediment, dirt, rust, silt and sand ranging from filtration of 20 microns down to 5 microns. Reduces particles 8 times smaller than what the naked eye can see.

STAGE 2:  (GAC; 5 Micron Granular Activated Carbon for Chemicals)
Granulated Activated Carbon /UDF - High efficiency pre-filter reduces and removes: chlorine, volatile organic compounds (V.O.C), pesticides, nitrates, herbicides, tastes, odor, and disinfection by products (Chloramines, THM, TCE). Cartridges are constructed totally of FDA grade materials and media. In addition KDF media may be used for the removal of lead and other heavy metals.
 
STAGE 3:  (CCB; 1 Micron Coconut Carbon Block for Chemicals)
Carbon Block Filter / CTO – High efficiency pre-filter removes Chlorine, then reduces or removes Pesticides, Nitrates, Herbicides, tastes, odor, and disinfection by-products (chloramines, THM, TCE), Volatile Organic Compounds (V.O.C).

STAGE 4:  (100 GPD  / 50PGD  Reverse Osmosis Membrane)
Reverse Osmosis Membrane- This semi permeable membrane filters and rejects tiny impurities, colloid, heavy metal, dissolvable solids, germs and other harmful substances. Virtually only water molecules and dissolved oxygen can pass through the membrane.  The rejected contaminants are flushed to drain. The product water is essentially nothing but high quality, low TDS water.

STAGE 5:  (Demineralization by Ionization DI Resin Bead Filtration)
Resin Filter / Demineralization by Ionization– Removes hard water minerals through an ion exchange process. Intended to prevent inorganic calcium, magnesium, and soluble iron etc...  Greatly increases quality of filtration.

STAGE6:  (PC; Post Carbon polishing filters for taste and odor)
Post Activated Carbon Filter / T33- This carbon filter treats only R.O. water so it does an excellent job of "polishing" any Volatile Organic Compounds (V.O.C), Pesticides, Nitrates, Herbicides, tastes, odor, and disinfection by-products (chloramines, THM, TCE). That may have slipped through the membrane, plus, adsorbs any odors that may come from the pressure storage tank. Gives water a clean refreshed taste on the way to your tap.